National Instruments RMX-410 Series, Руководство пользователя, Страница: 71 / 132

70
NATIONAL
INSTRUMENTS
5.9.4 Save <1..4>
This command saves the present state of the power supply to a specified location in memory
(refer to Table 5-7). Up to 4 states can be stored. Storage locations 1 through 4 are in nonvolatile
memory.
Save Front panel setting:
1. Press MENU button. MENU (green) LED illuminates. ”
set ” message appears on the Voltage
display.
2. Rotate Voltage encoder until ” MEMO ” message appears on Voltage display.
3. Press Voltage encoder. ” se ” message appears on Voltage display.
4. Press Voltage encoder. ” SA e ” message appears on Voltage display. Numbers ” 1..4 ” appear
on Current display.
5. Rotate the Current encoder to select required number value and then press the Current
encoder. Display blinks and returns to previous level.
5.9.5 Recall <1..4>
This command recalls the present state of the power supply from a specified location in memory
(refer to Table 5-7). Up to 4 states can be stored. Storage locations 1 through 4 are in nonvolatile
memory.
Recall front panel setting:
1. Press MENU button. MENU (green) LED illuminates. ”
set ” message appears on the Voltage
display.
2. Rotate the Voltage encoder until ” MEMO ” message appears on Voltage display.
3. Press Voltage encoder. ” ReC ” message appears on Current display.
4. Press Current encoder. Numbers ” 1..4 ” appear on Current display.
5. Rotate the Current encoder to select required number value and then press the Current
encoder. Display blinks and returns to previous level.