National Instruments RMC-8357 Скачать руководство пользователя страница 35

Страница: 35 / 88

2-17

RMC-8357 User Manual

Lockstep x4 DIMMs

Select

Enable

to enable Lockstep Technology support for x4 DIMM modules. The options are

Auto

Disabled

, and

Enabled

Memory Rank Sparing

This item indicates if memory rank sparing is supported by the motherboard. Memory rank

sparing enhances system memory performance. The options are

Enabled

and

Disabled

Patrol Scrub

Patrol Scrubbing is a process that allows the CPU to correct correctable memory errors detected

in a memory module and send the correction to the requestor (the original source). When this

item is set to

Enable

, the IO hub will read and write back one cache line every 16 K cycles if

there is no delay caused by internal processing. By using this method, roughly 64 GB of memory

behind the IO hub will be scrubbed every day. The options are

Enable

and

Disable

Patrol Scrub Interval

Use this item to specify the number of hours (between 0 to 24) required for the system to

complete a full patrol scrubbing. Enter 0 for patrol scrubbing to be performed automatically.

The default setting is

Demand Scrub

Demand Scrubbing is a process that allows the CPU to correct correctable memory errors found

in a memory module. When the CPU or I/O issues a demand-read command, and the read data

from memory turns out to be a correctable error, the error is corrected and sent to the requestor

(the original source). Memory is corrected as well. Select

Enable

to use Demand Scrubbing for

ECC memory correction. The options are

Enable

and

Disable

Device Tagging

Select

Enable

to support device tagging. The options are

Disable

and

Enable

South Bridge

The following South Bridge information will display:
•

USB Configuration

•

USB Module Version

•

USB Devices

Legacy USB Support

Select

Enabled

to support onboard legacy USB devices. Select Auto to disable legacy support

if there are no legacy USB devices present. Select Disable to have all USB devices available for

EFI applications only. The options are

Enabled

Disabled

and

Auto

Содержание RMC-8357

























































































Результаты поиска

Содержание RMC-8357

Отзывы:

National Instruments RMC-8357, Руководство пользователя, Страница: 35 / 88

Результаты поиска

Содержание RMC-8357

Отзывы: