2-6
|
ni.com
Chapter 2
Installation and BIOS Setup
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay-Off for the system
power to remain off after a power loss. Select Power-On for the system power to be
turned on after a power loss. Select Last State to allow the system to resume its last power
state before a power loss. The options are
Power-On
,
Stay-Off
and
Last State
.
CPU Configuration
The following CPU information will display:
•
CPU Signature
•
Microcode Patch
•
Max CPU Speed
•
Min CPU Speed
•
CPU Speed
•
Processor Cores
•
Hyper Threading Technology
•
Intel VT-x Technology
•
Intel SMX Technology
•
64-bit
•
EIST Technology
•
CPU C3 State
•
CPU C6 State
•
CPU C7 State
•
L1 Data Cache
•
L1 Code Cache
•
L2 Cache
•
L3 Cache
•
L4 Cache
Hyper-threading (Available when supported by the CPU)
Select Enabled to support Intel Hyper-threading Technology to enhance CPU performance.
The options are
Enabled
and
Disabled
.
Active Processor Cores
This feature determines how many CPU cores will be activated for each CPU. When all
is selected, all cores in the CPU will be activated. (Refer to Intel's website for more
information.) The options are
All
and
1
,
2
, and
3.
