National Instruments RMC-8354 Скачать руководство пользователя страница 83

Страница: 83 / 102

C-3

NI RMC-8354 User Manual

Creating a RAID1 Volume

Follow these steps to create a RAID1 volume:
1.

Select

Create RAID Volume

from the main menu and press <Enter>.

Specify a name for the RAID1 set and press <Tab> or <Enter> to go to the next field. (To
select the previous menu, press <Esc>.)

When

RAID Level

is highlighted, use the up and down arrow keys to select

RAID1

(Mirror)

and press <Enter>.

When

Disks

is highlighted, press <Enter> to select the HDD to configure for RAID.

Use the up and down arrow keys to highlight a drive and press the space bar to select it. A
triangle appears to confirm the drive selection.

When

Capacity

is highlighted, press <Enter> to specify the disk capacity to configure for

RAID1.

Press <Enter> when

Create Volume

is highlighted. A warning message displays,

indicating that all data on the selected disks will be lost.

At the

Are you sure you want to create this volume (Y/N)

prompt, press

<Y> to create the RAID volume or <N> to return to the

Create Volume

menu.

Creating a RAID10 (RAID1+ RAID0) Volume

Follow these steps to create a RAID10 (RAID1 + RAID0) volume:
1.

Select

Create RAID Volume

from the main menu and press <Enter>. The Create Volume

Menu screen appears.

Specify a name for the RAID10 set and press <Enter>.

When

RAID Level

is highlighted, use the up and down arrow keys to select

RAID10

(RAID1 + RAID0)

and press <Enter>.

When

Disk

is highlighted, press <Enter> to select the HDD to configure as RAID.

On the pop-up screen, use the up and down arrow keys to highlight a drive and press the
space bar to select it. A triangle appears to confirm the drive selection.

When

Stripe Size

is highlighted, use the up and down arrow keys to select the stripe size

of 4-128 KB for your RAID10 and press <Enter>. The default setting is 64 KB.

Note

For a server, use a lower stripe size; for a multimedia system, use a higher

stripe size.

When

RAID Capacity

is highlighted, enter your RAID volume capacity and press

<Enter>. The default setting is the maximum capacity allowed.

Press <Enter> when the

Create Volume

item is highlighted. A warning message displays,

indicating that all data on the selected disks will be lost.

At the

Are you sure you want to create this volume (Y/N)

prompt, press

<Y> to create the RAID volume or <N> to return to the

Create Volume

menu.

Содержание RMC-8354







































































































Результаты поиска

Содержание RMC-8354

Отзывы:

Бренды по названию

Популярные бренды

National Instruments RMC-8354, Руководство пользователя

Результаты поиска

Содержание RMC-8354

Отзывы:

Бренды по названию

Популярные бренды