background image

RM-26999 Calibration Procedure 

© National Instruments Corporation 

23

 

NI Services 

Visit 

ni.com/support

 to find support resources including documentation, downloads, 

and troubleshooting and application development self-help such as tutorials and 

examples. 

Visit 

ni.com/services

 to learn about NI service offerings such as calibration options, 

repair, and replacement. 

Visit 

ni.com/register

 to register your NI product. Product registration facilitates 

technical support and ensures that you receive important information updates  

from NI. 

NI corporate headquarters is located at 11500 N Mopac Expwy,  

Austin, TX 78759-3504, USA.  

Refer to the 

NI Trademarks and Logo Guidelines

 at 

ni.com/trademarks

 for more information on National Instruments 

trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. 

For patents covering National Instruments products/technology, refer to the appropriate location: 

Help»Patents

 in your software, 

the 

patents.txt

 file on your media, or the 

National Instruments Patents Notice

 at 

ni.com/patents

. You can find information 

about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the 

Export 

Compliance Information

 at 

ni.com/legal/export-compliance

 for the National Instruments global trade compliance policy 

and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS 

TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government 

Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and 

restricted data rights as set forth in FAR 52.227-14s, DFAR 252.227-7014, and DFAR 252.227-7015. 

© 2020 National Instruments Corporation. All rights reserved. 

377699A-01  December 2020 

 

Содержание RM-26999

























Отзывы: