My CMOS is corrupted. How do I set it back to default?
There are two methods that you can use to reset the CMOS.
1.
First Method
a)
Enter the BIOS setup program.
b)
Press <F9> to load BIOS defaults.
c)
Answer
Y
(Yes) to the verification prompt.
d)
Select
Save and Exit Setup
.
2.
Second Method
a)
Power off the chassis.
b)
Remove the controller from the chassis.
c)
Press the Clear CMOS button (SW1) for 2 to 3 seconds as shown in the following
figure.
d)
Reinstall the controller in the chassis.
Figure 7. Clearing the CMOS Contents
1
1. Push-Button Switch SW1
16
|
ni.com
|
PXIe-8821 Getting Started Guide
