National Instruments PXIe-8821, Руководство по началу работы

Страница: 14 / 18

Figure 6. Installing a DDR3L SO-DIMM in a PXIe-8821 Controller
2 1
1. DDR3L SO-DIMM Socket
2. DDR3L SO-DIMM Module
How do I flash a new BIOS?
For more information, refer to KnowledgeBase 2GIGKD0Z, Determining and Upgrading PXI
and VXI Embedded Controller BIOS Versions .
Where do I get the latest software drivers?
The latest National Instruments software is available from ni.com/downloads . For peripheral
drivers, refer to KnowledgeBase 3H3COSD8, What Peripheral Drivers Should I Use with My
PXI or VXI Controller? , at ni.com/support .
Troubleshooting
This section answers common troubleshooting questions you may have when using the
PXIe-8821 embedded controller.
What if the Controller Does Not Boot?
Several problems can cause a controller not to boot. Here are some things to look for and
possible solutions.
Things to Notice:
• Which LEDs come on? The PWROK/FAULT LED should stay lit green. The Drive
LED should blink during boot as the disk is accessed.
• What appears on the display? Does it hang at some particular point (BIOS, Operating
System, and so on)? If nothing appears on the screen, try a different monitor. Does your
monitor work with a different PC? If it hangs, note the last screen output that you saw for
reference when consulting National Instruments technical support.
14 | ni.com | PXIe-8821 Getting Started Guide