Storage
5% to 95% noncondensing (Tested in accordance with IEC-60068-2-78.)
Pollution Degree
2
Maximum altitude
2,000 m (800 mbar)
Indoor use only.
Note
For complete specifications, refer to the PXIe-8267 Specifications
at
.
Note
For more information about thermal considerations, go to
and enter the Info Code raidsupport.
The PXIe-8267 requires a chassis with slot cooling capacity ≥58 W. Not all chassis
with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer
for specifications to determine the ambient temperature
ranges your chassis can achieve.
Drive utilization and storage temperatures will have an impact on unpowered data
retention. Visit
and enter the Info Code ssdtemp for more information
about the impact of temperature on drive endurance.
Hardware Installation
Note
Before you begin, install and configure your chassis and controller.
Caution
To protect both yourself and the chassis from electrical hazards,
leave the chassis off until you finish installing the PXIe-8267.
Attention
Pour vous protéger, et protéger le châssis, contre les risques
électriques, laissez le châssis éteint tant que vous n'avez pas terminé
l'installation du PXIe-8267.
© National Instruments
5
PXIe-8267 Getting Started
