National Instruments PXIe-5820 Скачать руководство пользователя

Страница: 15 / 18

Using Microsoft Visual C/C++

If you're using NI-RFSA with Microsoft Visual C/C++, locate examples in the following
directory.

Table 7. Location of Microsoft Visual C/C++ Programming Examples

Software Option

Examples Location

NI-RFSA

<NIDocDir>

\NI-RFSA\examples

where

<NIDocDir>

is the

Users\Public\Public Documents

\National Instruments

directory.

Making a First Measurement

You can verify proper installation and configuration of your device by making a measurement
using the NI-RFSG and NI-RFSA Examples in LabVIEW.
1.

Connect the PXIe-5820 as follows:
a)

Connect the I/Q IN I+ port to the I/Q OUT I+ port using an MMPX (m)-to-
MMPX (m) cable.

Connect the I/Q IN I- port to the I/Q OUT I- port using an MMPX (m)-to-
MMPX (m) cable.

Connect the I/Q IN Q- port to the I/Q OUT Q- port using an MMPX (m)-to-
MMPX (m) cable.

Connect the I/Q IN Q+ port to the I/Q OUT Q+ port using an MMPX (m)-to-
MMPX (m) cable.

Select

Start

All Programs

National Instruments

LabVIEW

to launch LabVIEW.

Complete the following steps to open the Getting Started Examples:
a)

Select

LabVIEW

Help

Find Examples

Select

Hardware Input and Output

Modular Instruments

NI-RFSA

Getting

Started

RFSA Getting Started IQ (IQ Device).vi

Select

Hardware Input and Output

> Modular Instruments

NI-RFSG

Getting

Started

RFSG Getting Started Single Tone Generation (IQ Device).vi

Select the device identifier assigned to the PXIe-5820 in MAX in the

Device

drop-down

menu in both examples.

Start the NI-RFSG example to generate the CW tone at the I/Q OUT connectors of the
device.

Start the NI-RFSA example to acquire the CW tone at the I/Q IN connectors of the
device.

PXIe-5820 Getting Started Guide

Содержание PXIe-5820



















Результаты поиска

Содержание PXIe-5820

Отзывы:

Похожие инструкции для PXIe-5820

Бренды по названию

Популярные бренды

National Instruments PXIe-5820, Руководство по началу работы

Результаты поиска

Содержание PXIe-5820

Отзывы:

Похожие инструкции для PXIe-5820

Бренды по названию

Популярные бренды