manualshive.com logo in svg

National Instruments PXIe-4466, Руководство по началу работы, Страница: 7 / 18

Поделиться
Скачать
National Instruments PXIe-4466 Скачать руководство пользователя страница 7

PXIe-446x modules can be placed in PXI peripheral slots or PXI Express Hybrid

peripheral slots.

6. Touch any metal part of the chassis to discharge static electricity.
7. Ensure that the ejector handle is in the downward (unlatched) position.
8. Place the module edges into the module guides at the top and bottom of the

chassis. Slide the module into the slot until it is fully inserted.

Figure 2. 

Module Installation

1

2

3

1. Chassis
2. Hardware Module
3. Ejector Handle in Downward (Unlatched) Position

9. Latch the module in place by pulling up on the ejector handle.

10. Secure the module front panel to the chassis using the front-panel mounting

screws.

Note

 Tightening the top and bottom mounting screws increases

mechanical stability and also electrically connects the front

panel to the chassis, which can improve the signal quality and

electromagnetic performance.

11. Cover all empty slots using either filler panels (standard or EMC) or slot

blockers with filler panels, depending on your application.

© National Instruments

7

PXIe-4466/4467/4468 Getting Started Guide

Содержание PXIe-4466



















Отзывы:

Нет отзывов