manualshive.com logo in svg

National Instruments PXIe-4466, Руководство по началу работы, Страница: 6 / 18

Поделиться
Скачать
National Instruments PXIe-4466 Скачать руководство пользователя страница 6

Installing the PXIe-446

x

Notice

 To prevent damage to the PXIe-446x caused by ESD or

contamination, handle the module using the edges or the metal bracket.

Note

 To maintain forced air cooling in the PXIe system, refer to the

Maintain Forced-Air Cooling document.

1. Ensure the AC power source is connected to the chassis before installing the

module.

The AC power cord grounds the chassis and protects it from electrical damage

while you install the module.

2. Power off the chassis.
3. Inspect the slot pins on the chassis backplane for any bends or damage prior

to installation. Do not install a module if the backplane is damaged.

4. Remove the black plastic covers from all the captive screws on the module

front panel.

5. Identify a supported slot in the chassis. The following figure shows the

symbols that indicate the slot types.

Figure 1. 

Chassis Compatibility Symbols

1

2

3

4

5

1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot

ni.com

6

PXIe-4466/4467/4468 Getting Started Guide

Содержание PXIe-4466



















Отзывы:

Нет отзывов