14
|
ni.com
|
NI PXIe-4322 and TB-4322 Installation Guide
Create a Simulated Device
To run examples without the hardware installed, use an NI-DAQmx simulated device. To create
a simulated device in MAX complete the following steps:
1.
Launch MAX.
2.
Right-click
Devices and Interfaces»Create New
.
3.
From the dialog, select
Simulated NI-DAQmx Device or Modular Instrument
.
4.
Type
4322
in the text box at the top of the window.
5.
Select the device from the list provided.
6.
Click
OK
.
More Information
After you install NI-DAQmx, the NI-DAQmx documentation is available from
Start»
All Programs»National Instruments»NI-DAQ
. Additional resources are online at
ni.com/
gettingstarted
.
You can access online device documentation by right-clicking your module in MAX and
selecting
Help»Online Device Documentation
. A browser window opens to
ni.com/
manuals
with the results of a search for relevant documents. If you do not have Web access,
documents for supported modules are included on the NI-DAQmx disc.
Troubleshooting
•
Go to
ni.com/support/install
or
ni.com/kb
.
•
If you need to return your National Instruments hardware for repair or device calibration,
go to
ni.com/info
and enter
rdsenn
to start the Return Merchandise Authorization
(RMA) process.
Specifications (TB-4322)
Note
NI PXIe-4322 module specifications are located in the
NI PXIe-4322
Specifications
document.
All specifications are typical at 23 °C unless otherwise specified.
Calibration Interval
TB-4322 ............................................................No calibration
Electrical
TB-4322 is a feedthrough terminal block. For electrical output characteristics refer to the
NI PXIe-4322 Specifications
document.
