![background image](http://html1.mh-extra.com/html/national-instruments/pxie-4163/pxie-4163_getting-started-manual_3553448016.webp)
Software
Location
Description
InstrumentStudio
Note
InstrumentStudio is
supported only on 64-bit systems.
If you are using a 32-bit system,
use your driver's specific soft front
panel instead of InstrumentStudio.
InstrumentStudio is automatically installed
when you install the NI-DCPower driver. You
can access InstrumentStudio in any of the
following ways:
•
From the Windows start menu, select
National Instruments
»
[Driver] Soft
Front Panel
. This launches
InstrumentStudio and runs a soft front
panel populated with NI-DCPower
devices.
•
From the Windows start menu, select
National Instruments
»
InstrumentStudio 2018
. This launches
InstrumentStudio and runs a soft front
panel populated with devices detected on
your system.
•
From Measurement & Automation
Explorer (MAX), select a device and
then click
Test Panels...
. This launches
InstrumentStudio and runs a soft front
panel for the device you selected.
When you install
NI-DCPower on a 64-bit
system, you can monitor,
control, and record
measurements from
supported devices using
InstrumentStudio.
InstrumentStudio is a
software-based soft front
panel application that
allows you to perform
interactive measurements
on several different
device types in a single
program.
16
|
ni.com
|
PXIe-4163 Getting Started Guide