NI PXIe-1086 Getting Started Guide
|
© National Instruments
|
3
Electrical
The following section provides information about the NI PXIe-1086 AC input.
Note
Refer to the
NI PXIe-1086 User Manual
for full specifications.
AC Input
Input voltage range ........................................... 100 to 240 VAC
Operating voltage range
1
.................................. 90 to 264 VAC
Input current rating ........................................... 12 to 6 A
Input frequency range....................................... 50/60 Hz
Operating frequency range
1
.............................. 47 to 63 Hz
Over-current protection .................................... All outputs protected from short circuit and
overload with automatic recovery
Efficiency.......................................................... 70% typical
Power disconnect.............................................. The AC power cables provide main power
disconnect. Do not position the equipment so
that it is difficult to disconnect the power cord.
The front panel power switch causes the internal
chassis power supply to provide DC power to the
CompactPCI/PXI Express backplane. You also
can use the front panel terminal block 4-pin
connector and power mode switch to control the
internal chassis power supply.
Chassis Parts
The following figures show the key features of the NI PXIe-1086 chassis front and back panels.
1
This operating range is guaranteed by design.
