National Instruments PXI NI 8171 Series Скачать руководство пользователя | Manualshive

Страница: 50 / 73

background image

Chapter 4

Common Configuration Questions

NI 8171 Series User Manual

4-6

ni.com

Chassis Mouse and Keyboard

The PXI-1020 has an integrated PS/2 mouse. The PXI-1025 has an
integrated PS/2 keyboard and mouse. To simplify the configuration for
these chassis, the NI 8171 series includes an internal USB-to-PS/2 adapter.
When the NI 8171 series is installed in a PXI-1020 or PXI-1025 chassis,
the USB-to-PS/2 adapter is enabled automatically. With this adapter, you
can use both the chassis’ integrated keyboard/mouse and the PS/2 keyboard
and mouse connected to the NI 8171 series front panel. To enable
keyboard/mouse access in DOS or Windows 2000 environments, you
must enable the legacy USB. See the

section for more

information.

How do I set up the NI 8171 series to work with my chassis?

A

pxisys.ini

file is associated with each chassis. This file allows

software applications such as Measurement & Automation Explorer
(MAX) to identify the slot number for each board in the chassis.

You need the correct

pxisys.ini

file for your chassis. You can find these

files at

ni.com/support/pxisupp.htm

.. (Some chassis

.ini

files are

also included on the

PXI System Initialization for NI 8171

floppy disk

included with the NI-8171 series controller.) Copy the file to the

C:\WINNT

directory.

Upgrade Information

How do I upgrade system memory?

You can change the amount of installed RAM on the NI 8171 series by
upgrading the SO-DIMM.

To upgrade the RAM, remove the NI 8171 series from the PXI chassis.
Remove the old SO-DIMM module and install the new SO-DIMM in the
socket as shown in Figure 4-2.

National Instruments offers the following types of SO-DIMMs for use with
the NI 8171 series controller.

•

128 MB, 16MB

×

64, 7.5 ns, 1.05 in. max

•

256 MB, 32MB

×

64, 7.5ns, 1.05 in. max

Note

National Instruments has tested and verified that the SO-DIMMs we sell work with

the NI 8171 series. We recommend you purchase your SO-DIMM modules from National
Instruments. Other off-the-shelf SO-DIMM modules are not guaranteed to work properly.

«
...
48
49
50
51
52
...
»

Содержание PXI NI 8171 Series










































































Отзывы:

Нет отзывов

Похожие инструкции для PXI NI 8171 Series

Бренд: DBM Страницы: 50

Бренд: Xinje Страницы: 76

Pixie-4 Express

Бренд: XIA Страницы: 17

Бренд: Harmonic Страницы: 56

MultiConnect SE MTS2EA

Бренд: Multitech Страницы: 8

Aquaduct 240 eco

Бренд: Aqua Computer Страницы: 20

Бренд: ADS Technologies Страницы: 21

Secure Site Manager 16

Бренд: Black Box Страницы: 16

CORE 2 DUO E4000 - 3-2008

Бренд: Intel Страницы: 122

Бренд: Dave Embedded Systems Страницы: 79

Sporlan Division SCS-PB Series

Бренд: Parker Страницы: 10

Бренд: Paradyne Страницы: 28

Бренд: Proxim Страницы: 65

Бренд: A4Tech Страницы: 8

Бренд: AMD Страницы: 10

Бренд: QNAP Страницы: 11

Бренд: Qorvo Страницы: 15

Бренд: PairGain Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды