Chapter 2
Installation and Configuration
©
National Instruments Corporation
2-3
PXI-GPIB/PMC-GPIB for Windows NT
Install the PMC-GPIB
Warning
Electrostatic discharge can damage several components on these GPIB boards. To
avoid electrostatic damage when you handle the board, touch the antistatic plastic
package to a metal part of your system chassis before removing the board from the
package.
Complete the following steps to install your PMC-GPIB:
1.
Turn off your system.
2.
Find an unused PMC slot in your system. You may need to remove the
host from the system to access the PMC slot.
3.
Remove the corresponding slot filler panel from the host.