National Instruments PXI-8840 Quad-Core Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 22

National Instruments PXI-8840 Quad-Core Скачать руководство пользователя страница 12

Removing the NI PXI-8840 Quad-Core from a PXI
Chassis

To remove the NI PXI-8840 Quad-Core from a PXI chassis, complete the following steps.
1.

Power off the chassis.

2.

Remove any cables that may be attached to the controller front panel.

3.

Unscrew the four bracket-retaining screws in the front panel.

4.

Press the injector/ejector handle down.

5.

Slide the unit out of the chassis.

Cleaning

Use a dry, low-velocity stream of air to clean the NI PXI-8840 Quad-Core controller. If
needed, use a soft, nonmetallic brush for cleaning around components.

Make sure that the device is completely dry and free from contaminants before returning it to
service.

Common Configuration Questions

This section answers common configuration questions you may have when using an
NI PXI-8840 Quad-Core embedded controller.

General Questions

What do the LEDs on the front panel mean?

Refer to the LED status descriptions in the

Front Panel Features

section.

How do I check the configuration of the memory, hard drive,
time/date, and so on?

You can view these parameters in the BIOS setup. Complete the following steps to enter the
BIOS setup:
1.

Reboot the NI PXI-8840 Quad-Core.

2.

Press <Delete> during the memory tests.

Refer to the

Accessing BIOS Setup Utility

section of the

NI PXI-8840 Quad-Core User

Manual

for more information.

Can I use the internal Serial ATA drive and an external hard
drive at the same time?

Yes. Refer to the

BIOS Setup Utility

section of the NI PXI-8840 Quad-Core User Manual for

more information.

NI PXI-8840 Quad-Core Getting Started Guide

|

© National Instruments

|

11

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
10
11
12
13
14
...
»

Содержание PXI-8840 Quad-Core























Отзывы:

Нет отзывов