National Instruments PXI-5691, Руководство по началу работы

Страница: 3 / 14

Preparing the Environment
Ensure that the environment you are using the NI 5691 in meets the following specifications.
............................................................................ Operating temperature 0 to 55 °C
............................................................................ Operating humidity 10% to 90% RH, noncondensing
............................................................................ Pollution Degree 2
............................................................................ Maximum altitude 2,000 m
Indoor use only.
Note Refer to the device specifications on ni.com/manuals for complete
specifications.
Note Do not operate the device in a manner not specified in this document.
Product misuse can result in a hazard. You can compromise the safety protection
built into the product if the product is damaged in any way. If the product is
damaged, return it to National Instruments for repair.
Verifying the System Requirements
To use the NI-5690 instrument driver, your system must meet certain requirements.
For more information about minimum system requirements, recommended system, and
supported application development environments (ADEs), refer to the product readme, which
is available on the driver software media or online at
ni.com/updates .
Verifying the Kit Contents
Figure 1. NI 5691 Kit Contents
1 3 4 2
1. NI 5690 Module
2. SMA Cable 3. NI-5690 Driver Software Media
4. NI PXI-5691 Getting Started Guide (this
document)
NI PXI-5691 Getting Started Guide
|
© National Instruments
|
3