GETTING STARTED GUIDE
NI PXI-5671
2.7 GHz RF Vector Signal Generator
Note
Before you begin, install and configure your chassis and controller.
This document explains how to install, configure, and test the NI PXI-5671 (NI 5671). The
NI 5671 is a 2.7 GHz RF vector signal generator (VSG) with digital upconversion. The
NI 5671 ships with the NI-RFSG instrument driver, which you use to program the device.
The NI 5671 comprises the following devices:
•
NI PXI-5610 (NI 5610) RF upconverter module
•
NI PXI-5441 (NI 5441) arbitrary waveform generator (AWG) module
To access NI 5671 documentation, navigate to
Start
»
All Programs
»
National Instruments
»
NI-RFSG
»
Documentation
.
The specifications document for your device is installed with the driver software. Refer to
for the most recent specifications for your device.
Caution
The protection provided by this product may be impaired if it is used in a
manner not described in this document.
Hot Surface
If the NI 5671 has been in use, it may exceed safe handling
temperatures and cause burns. Allow the NI 5671 to cool before removing it from
the chassis.
Contents
Electromagnetic Compatibility Guidelines...............................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2
Preparing the Environment....................................................................................................... 5
Installing the Software.............................................................................................................. 6
Installing the NI 5671............................................................................................................... 6
