National Instruments PXI-1407, Руководство пользователя

Страница: 15 / 48

© National Instruments Corporation 2-1 IMAQ PCI/PXI-1407 User Manual
2
Installation
This chapter lists what you need to get started acquiring images with
your IMAQ device; describes optional equipment and custom cables;
and explains how to unpack, configure, and install your IMAQ device.
What You Need to Get Started
To set up and use your PCI/PXI-1407, you will need the following:
❑
One of the following 1407 devices:
– PCI-1407
– PXI-1407
❑
Getting Started with Your IMAQ System
❑
NI-IMAQ release notes
❑
IMAQ PCI/PXI-1407 User Manual
❑
NI-IMAQ for Windows 2000/NT/9x and online documentation
❑
Optional software packages and documentation:
– IMAQ Vision for G, LabWindows/CVI, or ComponentWorks
– IMAQ Vision Builder
– LabVIEW
– BridgeVIEW
– LabWindows/CVI
❑
IMAQ BNC-1 shielded, 75
Ω
BNC cable for VIDEO (included
with your PCI-1407)
❑
Your Pentium-based PCI, PXI, or CompactPCI computer running
Windows 2000, Windows NT, or Windows 9x
❑
A video camera or other video source