National Instruments Power and I/O Accessory, Руководство пользователя

Страница: 1 / 5

USER GUIDE
Power and I/O Accessory
For NI 177x Smart Cameras
The Power and I/O Accessory for NI 177x Smart Cameras (Power and I/O Accessory) is a
terminal block that simplifies power and I/O signal configuration for the NI 177x Smart Camera.
This document describes what you need to get started, installation and operation instructions,
and features of the Power and I/O Accessory.
Figure 1.
Power and I/O Accessory for NI 177x Smart Cameras
The Power and I/O Accessory has the following features:
• 25-pin D-SUB connector and a 17-pin M12 to 25-pin D-SUB cable
• Spring terminals for each NI 177x Smart Camera I/O signal
• Spring terminal for 24 V output
• Safe mode switch
• User-replaceable fuses for open collector and current controlled outputs, RS-232, and
accessory power
1 IN0–IN3 connectors
2 TRGIN connector
3 RS-232 connector
4 24V IN connector
5 SAFE MODE switch
6 24V OUT connector
7 LED DRV connector
8 OUT0–OUT3 connectors
9 CAMERA connector
NATIONAL
INSTRUMENTS
OUT0 T0
IN0 IN0 IN1 IN1 IN2
IN3
1
14 14
13
25
TRGIN TRGIN 24V IN IN
SAFE AFE
MODE MODE
RS-232 RS-232
CAMERA CAMERA
INP INPUTS
OUT1 T1 OUT2 OUT3 LED LED DRV RV
24V OUT 24V OUT
1
3
4
9
2
6 5
7
8