Appendix D
Troubleshooting and Common Questions
PCMCIA Serial for Windows 98/95
D-4
©
National Instruments Corporation
4.
Click on the
View devices by type
button.
5.
Double-click on the
Ports (COM & LPT)
icon to display a list of all
ports that Windows recognizes. If you have previously installed a
PCMCIA serial card, double-click on
Other Devices
, where Windows
lists the ports it does not recognize.
Note
To remove ports on two- or four-port cards, you must open the
Multifunction
adapter
class, select the name of the interface, and click on the
Remove
button.
6.
Select a National Instruments port name from the list of ports that
corresponds to a serial port (for example, COM 5, COM 6, COM 7, or
COM 8). Figure D-1 shows the
Ports
list in the
Device Manager
with
a port selected.
Figure D-1.
Port Selected in Device Manager
7.
Click on the
Remove
button, and click on
OK
to confirm the removal
of the serial hardware information.
8.
Repeat steps 6 and 7 until all serial port entries are removed. Then,
click on
Refresh
to force Windows 98/95 to detect serial hardware and
display the
New Hardware Found
dialog box.
Содержание PCMCIA Serias
Страница 1: ...PCMCIA 485 2...
