![background image](http://html1.mh-extra.com/html/national-instruments/pcie-1433/pcie-1433_user-manual-and-specifications_3390019026.webp)
Appendix A
Specifications
NI PCIe-1433 User Manual and Specifications
A-2
ni.com
Trigger output
Voltage range...................................0 to 5 V (TTL)
Output high voltage ..................3.06 V at 3 mA source
Output low voltage ...................0.55 V at 3 mA sink
Polarity ............................................Programmable, active high
or active low
Maximum pulse rate ...............................2 MHz
Clocks
Pixel clock frequency range....................20 MHz to 85 MHz
1
Note
The Camera Link specification requires cameras to transmit at a minimum of
20 MHz.
Serial Interface
Baud rates supported ..............................9.6, 19.2, 38.4, 57.6, 115.2, 230.4,
460.8, or 921.6 kbps
Power Requirements
Voltage....................................................+3.3 V (1.5 A)
+12 V (1.25 A)
Power Over Camera Link (PoCL)
Voltage....................................................12 V nominal
Average power output ............................4 W maximum
SafePower ...............................................Supported
Physical Characteristics
Dimensions .............................................10.7 cm × 17.5 cm
(4.2 in. × 6.9 in.)
Weight ....................................................205 g (7.23 oz)
1
This value corresponds to the serialized Camera Link cable transmission rate of 140 to 595 MHz.