©
National Instruments Corporation
I-1
Index
Numbers
+5 V signal
description (table), 3-3
power connections, 3-7
self-resetting protection circuit breaker, 3-7
A
AGND signal (table), 3-3
AGND<0/16..15/31> signals (table), 3-3
analog output signal connections, 3-4 to 3-6
common questions, B-2
current output for 6704 device, 3-5 to 3-6
voltage channel (VCH) outputs (figure), 3-4
voltage output, 3-4 to 3-5
analog output specifications, A-1 to A-3
current output, 6704 only, A-2
dynamic characteristics, A-2
stability, A-2 to A-3
transfer characteristics, A-1
voltage output, A-1 to A-2
B
bus interface
circuitry, 4-2
specifications, A-3
C
calibration, 5-1 to 5-4
current output calibration for 6704,
5-3 to 5-4
gain adjustment, 5-4
offset adjustment, 5-4
external calibration, 5-1 to 5-2
6703 calibration channel numbers
(table), 5-2
6704 calibration channel numbers
(table), 5-2
saving calibration values, 5-4
self-calibration, 5-1
voltage output calibration
gain adjustment, 5-3
offset adjustment, 5-3
common questions.
See
questions about
PCI/PXI-6703/6704.
ComponentWorks software, 1-3
configuration
common questions, B-1 to B-2
overview, 2-2
connector.
See
I/O connector.
conventions used in manual,
iv
current output for 6704 device
calibration, 5-3 to 5-4
gain adjustment, 5-4
offset adjustment, 5-4
ICH connection as current output
(figure), 3-5
power-up condition, 3-6
signal connections, 3-5 to 3-6
specifications, A-2
custom cabling, 1-5
D
DGND signal (table), 3-3
digital I/O
common questions, B-2
example connections (figure), 3-6
hardware overview, 4-2
power-up condition, 3-7
