manualshive.com logo in svg

National Instruments PCI-1407, Руководство пользователя

Поделиться
Скачать
National Instruments PCI-1407 Скачать руководство пользователя страница 18

©

 National Instruments Corporation

2-1

IMAQ PCI/PXI-1407 User Manual

2

Installation

This chapter explains how to install your PCI/PXI-1407.

Installation

Note

You must install the NI-IMAQ driver software before installing your 
PCI/PXI-1407. For information on how to install NI-IMAQ, please see the Set up 
and Test the PCI/PXI-1407 document and your NI-IMAQ release notes.

♦

PCI-1407

You can install the PCI-1407 in any available PCI expansion slot in your 
computer. However, to achieve the best noise performance, you should 
leave as much room as possible between the PCI-1407 and other boards and 
hardware. The following are general instructions, but consult your 
computer user manual or technical reference manual for specific 
instructions and warnings.

1.

Plug in but do not turn on your computer before installing the 
PCI-1407. The power cord grounds the computer and protects it from 
electrical damage while you are installing the module.

Warning

To protect both yourself and the computer from electrical hazards, the computer 
should remain off until you finish installing the PCI-1407.

2.

Remove the top cover or access port to the PCI bus.

3.

Select any available PCI expansion slot.

4.

Locate the metal bracket that covers the cut-out in the back panel of the 
chassis for the slot you have selected. Remove and save the 
bracket-retaining screw and the bracket cover. 

5.

Touch the metal part of the power supply case inside the computer to 
discharge any static electricity that might be on your clothes or body.

6.

Line up the PCI-1407 with the BNC connectors near the cut-out on the 
back panel. Slowly push down on the top of the PCI-1407 until its 
card-edge connector is resting on the expansion slot receptacle. Using 
slow, evenly distributed pressure, press the PCI-1407 straight down 
until it seats in the expansion slot.

Содержание PCI-1407




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды