![background image](http://html.mh-extra.com/html/national-instruments/none/none_user-manual_709662046.webp)
Chapter 2
Measurement Studio .NET Class Libraries
Measurement Studio User Manual
2-28
ni.com
•
Configure the format of value labels to engineering or date/time.
•
Display tooltips reflecting the current value of the pointer.
•
Interactively change the value of the control by clicking or dragging
and moving the pointer with the mouse.
•
Interactively change the range of an axis and invert the axis at run time
by clicking on the axis end labels.
•
Programmatically move the pointer to previous or next value.
•
Perform hit testing of mouse cursor coordinates.
•
Specify the image format of the control as BMP, GIF, JPEG, or PNG.
Use the Measurement Studio knob, gauge, and meter controls, as shown in
Figure 2-4, to input and display numeric data on your user interface.
Figure 2-4.
Knob, Gauge, and Meter Windows Forms Controls
With the knob, gauge, and meter controls and the classes that interface with
the controls, you can perform the following operations:
•
Specify the start and sweep angle of the arc programmatically or from
the Properties window.
•
Use automatic division spacing, custom divisions, and invert the scale.