National Instruments NI-XNET LIN, Руководство по эксплуатации

Страница: 5 / 24

NI-XNET LIN Transceiver Cable Operating Instructions | © National Instruments | 5
Caution
You
must
make sure that transient disturbances
do not exceed 140% of the rated voltage.
Caution
The system shall be mounted in an ATEX
certified enclosure with a minimum ingress protection rating
of at least IP54 as defined in IEC/EN 60529 and used in an
environment of not more than Pollution Degree 2.
Caution
The enclosure must have a door or cover
accessible only by the use of a tool.
Mounting the NI-XNET LIN Transceiver Cable
Caution
The NI-XNET LIN Transceiver Cable is a
thermally active device that dissipates heat.
Refer to the user manual of the host this device directly
connects to for specific information regarding thermal
management. Not following mounting requirements may
affect the system ambient temperature and/or the
measurement accuracy of modules in the system.