© National Instruments
|
2-1
2
Software Overview
National Instruments provides two options for developing applications for the NI 17xx Smart
Camera.
Note
Vision Builder for Automated Inspection and NI Vision Acquisition Software
are included with the NI 17xx Smart Camera. LabVIEW, the LabVIEW Real-Time
Module, and the NI Vision Development Module are sold separately.
The following sections describe the installation and configuration process for each development
environment:
•
Refer to
Configuring the NI Smart Camera with Vision Builder AI
for information about
using the NI 17xx Smart Camera with Vision Builder AI.
•
Refer to
Configuring the NI Smart Camera with LabVIEW
for information about using the
NI 17xx Smart Camera with LabVIEW.
The installation and configuration process for each development environment is different.
Complete
only
the instructions for your chosen development environment.
Caution
National Instruments software may require you to update the firmware for
this device. Do
not
remove power from the device until the software indicates that the
firmware update is complete. Removing power during a firmware update could cause
your device to become unusable.
Vi
s
ion B
u
ilder
for
A
u
tom
a
ted In
s
pection
L
ab
VIEW
L
ab
VIEW Re
a
l-Time Mod
u
le
NI Vi
s
ion Development Mod
u
le
NI Vi
s
ion Ac
qu
i
s
ition
S
oftw
a
re
or
Содержание NI Vision 17 Series
Страница 1: ...ISC 1752...