![background image](http://html1.mh-extra.com/html/national-instruments/ni-vision-17-series/ni-vision-17-series_user-manual_3460223055.webp)
© National Instruments
|
6-5
Maximum Frame Rate
Frame rate is the inverse of the frame period. The frame period is the time from the start of
exposure on one frame to the start of exposure on the next frame, as shown in Figure 6-2.
Figure 6-2.
Frame Period
The frame period is affected by the following factors:
•
Partial scan mode, as described in the
•
Binning, as described in the
section of Chapter 5,
•
Exposure time, as described in the
section of this chapter
•
Lighting mode, as described in Chapter 4,
Connecting Lighting and External Devices
•
Trigger delay, as described in the
section of this chapter
Determining the Maximum Frame Rate
You can determine the maximum frame rate for your configuration in software by reading the
Max Frame Rate
indicator in Vision Builder AI, reading the
Acquisition Frame Rate Limit
attribute in LabVIEW, or reading the
Max Frame Rate
indicator in MAX.
When external triggering is enabled, do not trigger faster than the maximum frame rate. If a
trigger occurs faster than the maximum frame rate, the trigger is ignored.
Use Equation 6-2 to understand how software determines the maximum frame rate:
(6-2)
where
min frame period
is the minimum amount of time for the strobe and trigger
mode, as described in the
Calculating the Minimum Frame Period
section.
1
Frame Period
Trigger
Expo
su
re
Im
a
ge Re
a
do
u
t
1
max frame rate
1
min frame period
-------------------------------------------
=
Содержание NI Vision 17 Series
Страница 1: ...ISC 1752...