INSTALLATION INSTRUCTIONS
NI TB-2637
8
×
32 1-Wire Terminal Block for the NI PXI-2534
This document describes how to install and connect signals to the
National Instruments TB-2637 terminal block. Refer to the
NI Switches
Getting Started Guide
to determine when to install the NI TB-2637.
Introduction
The NI TB-2637 terminal block installs in front of the NI PXI-2534 switch
module and has screw terminals that provide access to the rows and
columns of the matrix.
1. Unpack the Terminal Block
The terminal block is shipped in an antistatic package to prevent
electrostatic discharge (ESD) that can damage several components on the
terminal block. To avoid such damage when you handle the terminal block,
take the following precautions:
Caution
Never
touch the exposed pins of connectors.
•
Ground yourself using a grounding strap or by touching a grounded
object.
•
Touch the antistatic package to a metal part of the chassis before you
remove the terminal block from the package.
Remove the terminal block from the package and inspect the terminal block
for loose components or any sign of damage. Notify NI if the terminal
block appears damaged in any way. Do
not
install a damaged terminal
block on a switch module.
Store the terminal block in the antistatic package when not in use.
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
