NI SCXI-1336 Installation Instructions
6
ni.com
4. Install the Terminal Block
To connect the SCXI-1336 to the SCXI-1129 front panel, refer to Figure 3
and complete the following steps:
Note
Install the SCXI-1129 if you have not already done so. Refer to the
NI Switches
Getting Started Guide
for more information.
1.
Plug the SCXI-1336 onto the front connector of the SCXI-1129.
2.
Tighten the top and bottom thumbscrews on the terminal block rear
panel to hold it securely in place.
Figure 3.
Installing the SCXI-1336 Terminal Block
1
Thumbscrews
2
Front Connector
3
SCXI-1129
4
SCXI-1336
4
1
3
2