![background image](http://html1.mh-extra.com/html/national-instruments/ni-pxie-5105/ni-pxie-5105_getting-started-manual_3488673007.webp)
11. Cover all empty slots using filler panels or slot blockers to maximize cooling air flow.
12. Power on the chassis.
Note
For more information about maximizing cooling air flow, refer to the
Maintain Forced-Air Cooling Note to Users
included in your kit.
Installing the NI PCI-5105
1.
Power off and unplug the computer.
2.
Access the computer system expansion slots. This step might require you to remove one
or more access panels on the computer case.
3.
Locate a compatible slot and remove the corresponding slot cover on the computer back
panel. NI 5105 modules can be inserted only into PCI slots.
4.
Touch any metal part of the computer to discharge any static electricity.
5.
Insert the module into the slot you selected. Gently rock the module in to place without
forcing it.
Figure 4.
Module Installation
1
2
3
1. Module
2. System Expansion Slot
3. PC
6.
Secure the module mounting bracket to the computer back panel rail.
Caution
It is important to completely screw the device into the slot, both for
mechanical stability and for creating a solid ground connection, which reduces
signal noise. Improperly secured devices may affect the accuracy of device
specifications.
7.
Replace any access panels on the computer case.
8.
Plug in and power on your computer.
NI PXI/PXIe/PCI-5105 Getting Started Guide
|
© National Instruments
|
7