![background image](http://html1.mh-extra.com/html/national-instruments/ni-pxie-5105/ni-pxie-5105_getting-started-manual_3488673006.webp)
4.
Remove the black plastic connectors from all the captive screws on the module front
panel.
5.
Identify a supported slot in the chassis. The following figure shows the symbols that
indicate the slot types.
Figure 2.
Chassis Compatibility Symbols
NI PXIe-1062Q
1
2
3
4
5
1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot
PXI modules can be placed in PXI peripheral slots or PXI Express Hybrid peripheral
slots. PXI Express modules can be placed in PXI Express peripheral slots, PXI Express
Hybrid peripheral slots, or PXI Express System Timing slots.
6.
Touch any metal part of the chassis to discharge static electricity.
7.
Ensure that the ejector handle is in the unlatched (downward) position.
8.
Place the module edges into the module guides at the top and bottom of the chassis. Slide
the device into the slot until it is fully inserted.
Figure 3.
Module Installation
2
3
NI PXIe-1075
1
1. Chassis
2. Hardware Module
3. Ejector Handle in Down (Unlatched Position)
9.
Latch the module in place by pulling up on the ejector handle.
10. Secure the device front panel to the chassis using the front-panel mounting screws.
6
|
ni.com
|
NI PXI/PXIe/PCI-5105 Getting Started Guide