![background image](http://html2.mh-extra.com/html/national-instruments/ni-pxie-4138/ni-pxie-4138_calibration-procedure_3567885005.webp)
The
as-left
limits are equal to the published NI specifications for the device, less guard bands
for measurement uncertainty, temperature drift, and drift over time. NI uses these limits to
determine whether the device will meet the device specifications over its calibration interval.
Calibration Overview
Calibration includes the steps shown in the following figure.
Figure 1.
Calibration Overview
Document
Post-Adjustment
Results
Document
Pre-Adjustment
Results
Calibration/
Verification
Complete
Yes
No
Meets
Calibration
Test Limits?
Review Verification/
Adjustment Procedure
or Return Device
Verify
Adjust (Calibration Constants,
Dates, and Temperatures
Updated)
Verify
1.
Initial Setup—Install the NI 4138 and configure it in Measurement & Automation
Explorer (MAX) .
2.
Verification—Verify the existing operation of the NI 4138. This step confirms whether
the device is operating within the published specifications prior to adjustment.
3.
Adjustment—Adjust the calibration constants of the NI 4138.
4.
Reverification—Repeat the Verification procedure to ensure that the device is operating
within the published specifications after adjustment.
Refer to the following sections to complete each procedure.
NI PXIe-4138 Calibration Procedure
|
© National Instruments
|
5