3.
Click
Start
to test device functions, or
Help
for operating instructions.
To troubleshoot errors, refer to the
NI-DAQmx Help
, or go to
.
Take an NI-DAQmx Measurement
NI-DAQmx Channels and Tasks
Refer to the
NI-DAQmx Help
for complete information about channels and tasks.
Use the DAQ Assistant to configure virtual channels and tasks in MAX or in your application.
Configure a Task Using the DAQ Assistant in MAX
Complete the following steps to create a task using the DAQ Assistant in MAX:
1.
In MAX, right-click
Data Neighborhood
and select
Create New
to open the DAQ
Assistant.
2.
Select
NI-DAQmx Task
and click
Next
.
3.
Select
Acquire Signals
.
4.
Select the analog input, and the measurement type, such as voltage.
5.
Select the physical channel(s) to use and click
Next
.
6.
Name the task and click
Finish
.
7.
Configure the individual channel settings. Each physical channel you assign to a task
receives a virtual channel name. To modify the input range or other settings, select the
channel. Click
Details
for physical channel information. Configure the timing and
triggering for your task. Click
Run
.
Datasheet
Sales:
+44 (0) 1273 570 220
Website:
www.amplicon.com
Email:
IT and Instrumentation for industry
Amplicon.com