NI PXI-5660 Getting Started Guide
4
ni.com
Figure 1.
NI 5660 Kit Contents and Replacement Part Numbers
4. Installing the Software
Complete the following steps to install the components of the instrument driver software. You
must
install all of the included software before installing any RF vector signal analyzer hardware.
1.
Install an application development environment (ADE) such as LabVIEW, LabWindows
™
/CVI
™
,
or a third-party program according to its instructions. Any development environment you intend to
use must be installed before you install the driver software and the Spectral Measurements Toolkit.
1
NI PXI-1042 or NI PXI-1045 Chassis (not included)
2
NI 5600 RF Downconverter Module
3
NI 5620 IF Digitizer Module
4
Short, Semi-Rigid SMA-to-SMA Cable, 763480-01
5
Long, Semi-Rigid SMA-to-SMA Cable, 763481-01
6
Semi-Flexible SMA-to-SMA Cable, 763488-01
7
Cable Wrenches (2), 746016-01
8
Screwdriver, 772006-01
4
5
6
1
NI PXI-104
2
8
7
2
NI 5
600
POW
ER
S
TATU
S
RF
DO
WN
CON
VER
TER
+20
dBm
MA
X
+
3
0 d
Bm
MA
X
WIT
H ATT
N
3