Chapter 1
Introduction
1-4
ni.com
National Instruments Application Software
This section describes the National Instruments application software
packages you can use to analyze and process the images you acquire with
the NI 1430.
Vision Builder for Automated Inspection
NI Vision Builder for Automated Inspection (Vision Builder AI) is
configurable machine vision software that you can use to prototype,
benchmark, and deploy applications. Vision Builder AI does not require
programming, but is scalable to powerful programming environments.
Vision Builder AI allows you to easily configure and benchmark a
sequence of visual inspection steps, as well as deploy the visual inspection
system for automated inspection. With Vision Builder AI, you can perform
powerful visual inspection tasks and make decisions based on the results
of individual tasks. You also can migrate the configured inspection to
LabVIEW, extending the capabilities of the applications if necessary.
Vision Development Module
NI Vision Development Module, which consists of NI Vision and
NI Vision Assistant, is an image acquisition, processing, and analysis
library of more than 270 functions for the following common machine
vision tasks:
•
Pattern matching
•
Particle analysis
•
Gauging
•
Taking measurements
•
Grayscale, color, and binary image display
You can use the Vision Development Module functions individually or
in combination. With the Vision Development Module, you can acquire,
display, and store images, as well as perform image analysis and
processing. Using the Vision Development Module, imaging novices and
experts can program the most basic or complicated image applications
without knowledge of particular algorithm implementations.
As a part of the Vision Development Module, NI Vision Assistant is an
interactive prototyping tool for machine vision and scientific imaging
developers. With Vision Assistant, you can prototype vision applications
quickly and test how various image processing functions work.
