![background image](http://html.mh-extra.com/html/national-instruments/ni-pci-5105/ni-pci-5105_calibration-procedure_710203035.webp)
NI 5105 Calibration Procedure
|
© National Instruments
|
35
Appendix B: Calibration Utilities
NI-SCOPE supports several calibration utilities you can use to retrieve information about
adjustments performed on the NI 5105, change the external calibration password, and store
small amounts of information in the onboard EEPROM. Although you can retrieve some data
using MAX, you can retrieve all the data programmatically using NI-SCOPE functions.
MAX
To retrieve data using MAX, complete the following steps:
1.
Select the device from which you want to retrieve information from
My System»Devices
and Interfaces
.
2.
Select the
Settings
tab in the lower left corner.
You should see information about the last date and temperature for both external and
self-calibration.
NI-SCOPE
NI-SCOPE provides a full complement of calibration utility functions and VIs. Refer to the
NI High-Speed Digitizers Help
for the complete function reference and VI reference. The utility
functions include:
•
niScope Cal Change Password VI (
niScope_CalChangePassword
)
•
niScope Cal Fetch Count VI (
niScope_CalFetchCount
)
•
niScope Cal Fetch Date VI (
niScope_CalFetchDate
)
•
niScope Cal Fetch Misc Info VI (
niScope_CalFetchMiscInfo
)
•
niScope Cal Fetch Temperature VI (
niScope_CalFetchTemperature
)
•
niScope Cal Store Misc Info VI (
niScope_CalStoreMiscInfo
)