![background image](http://html1.mh-extra.com/html/national-instruments/ni-flexrio-pxie-7971r/ni-flexrio-pxie-7971r_getting-started-manual_3596788006.webp)
and by selecting
Start
»
All Programs
»
National Instruments
»
NI FlexRIO
»
NI FlexRIO
Adapter Module Documentation
.
Related Information
on page 3
NI FlexRIO FPGA Module Signals
on page 10
Installing the NI FlexRIO FPGA Module
on page 7
Installing the NI FlexRIO Devices
Note
You must install the software before installing the hardware.
Unpacking
The NI 7971R modules ship in antistatic packages to prevent electrostatic discharge from
damaging module components. To prevent such damage when handling the modules, ground
yourself using a grounding strap or by holding a grounded object, such as your computer
chassis, and complete the following steps:
1.
Touch the antistatic package to a metal part of the computer chassis before removing the
module from the package.
Caution
Never touch the exposed pins of connectors.
2.
Remove each module from the package and inspect it for loose components or any other
sign of damage.
Notify NI if the modules appear damaged in any way. Do not install a damaged module into
the chassis.
Preparing the Environment
Ensure that the environment you are using the NI 7971R in meets the following specifications.
............................................................................
Operating temperature (IEC
60068-2-1, IEC60068-2-2)
0 °C to 55 °C
............................................................................
Operating humidity
(IEC 60068-2-56)
10% to 90% RH, noncondensing
............................................................................
Pollution Degree
2
............................................................................
Maximum altitude
2,000 m at 25 °C ambient temperature
Indoor use only.
Note
Refer to the
NI PXIe-7971R Specifications
specifications.
6
|
ni.com
|
NI PXIe-7971R FPGA Module Getting Started Guide