National Instruments NI EDIDS-2400 Series, Руководство пользователя, Страница: 11 / 314

NI EDIDS-2400 Series User Manual | © National Instruments | 11
3.1 What Is Included
Software
1. DI Driver System software image pre-installed on the system controller
2. NI Software Calibration Management Toolkit (SCM) for LabVIEW, downloaded from www.ni.com .
Hardware
1. Expandable Direct Injector Driver System
DI Driver System
cRIO-9082
Integrated
Controller & Chassis
781787-02
NI 9411
Digital Input
Module
779005-01
NI 9751
DI Driver
Module
782076-01
EDIDS-2403
1 1 1
EDIDS-2406
1 1 2
EDIDS-2409
1 2 3
EDIDS-2412
1 2 4
Table 3.1.a, I/O Hardware Included In The Expandable DI Driver System
Optional I/O modules supported by all DI Driver Systems
• NI-9220 16-Channel, 100 kS/s/ch, 16-bit, ±10 V Analog Input Module, 37-Pin D-SUB (P/N: 782615-01)
• NI-9862 1-Port High-Speed/FD NI-XNET CAN C Series Module (P/N: 781639-01)
Optional I/O modules supported by Optional NI-9155 MXIe Expansion Chassis
• NI-9411 6-Channel, 500 ns, ±5 to 24 V, Differential Digital Input Module (P/N: 779005-01)
• NI-9754 8 Channel TTL Output Module for Engine Synchronous Digital Output(P/N: 782077-01)
• NI-9757 2-Channel Bosch LSU 4.2 or 4.9 wideband sensor controller module (P/N: 782079-01)
• NI-9758 PFI Driver Module (P/N: 782080-01)
• NI-9759 Electronic Throttle Driver Module (P/N: 782081-01)