National Instruments NI EDIDS-2400 Series, Руководство пользователя, Страница: 118 / 314

118 | ni.com | NI EDIDS-2400 Series User Manual
Tip Strip: Indicates successful completion of the position calibration process.
Detail: Indicates whether a successful calibration process was completed. This Boolean will NOT be set to TRUE if
either of the following Booleans are set to TRUE:
uLimitPos_ChX
uLimitNeg_ChX
uLimitPos_ChX
Tip Strip: Indicates driver voltage limits are exceeded during positive position calibration.
Detail: Indicates the maximum positive voltage applied to the throttle motor upon finding the maximum position
sensor signal.
uLimitNeg_ChX
Tip Strip: Indicates driver voltage limits are exceeded during negative position calibration.
Detail: Indicates the maximum negative voltage applied to the throttle motor upon finding the minimum position
sensor signal.
PsnCalDiff_Fault_ChX
Tip Strip: Indicates the threshold difference between min and max positions were not met during Position Cal.
Detail: At the completion of the position calibration process, the absolute value of the difference between the
maximum and minimum position sensor signal voltages is compared againsts the Pos Cal Diff Thresh (V) within
the Position Cal Settings cluster. If is is less than the threshold, then there was something wrong with the position
calibration process because the throttle plate did not move through the expected range of travel, or the position
sensor is faulty. Such a fault is indicated by this Boolean when TRUE, and Position Calibrated will be set to FALSE
upon completion of the calibration process.