National Instruments Direct Injector Driver System Manual
© 2013 National Instruments. All rights reserved.
3.3.1 C-Series Module Slot Assignments
NI DIDS-2003 3-Channel Direct Injector Driver System
The NI DIDS-2003 DI Driver System includes a cRIO-9076 integrated controller and chassis with four slots. The slot
assignments for the NI DIDS-2003 system are shown in figure 3.3.1.a, with the ability to add optional NI 9215 and NI
9758 (PFI Driver) modules (purchased separately). The DI Driver System software can only communicate with the
modules when they are in their assigned slots shown in figure 3.3.1.a.
Figure 3.3.1.a, 3-Ch DI Driver System Configuration With Optional NI 9215 and PFI Driver
*The NI 9215 and NI 9758 (PFI Driver) modules are optional modules that may be purchased separately. For more
information on the functionalities of these modules please see
Using The DI Driver System to Control Fuel Pressure
.
NI DIDS-2006, NI DIDS-2009, and NI DIDS-2012 6-, 9- and 12-Channel Direct Injector
Driver Systems
The NI DIDS-2006, NI DIDS-2009, and NI DIDS-2012 DI Driver Systems include a cRIO-9022 controller and a
cRIO-9114 8-slot chassis. The slot assignments for the NI DIDS-2006, NI DIDS-2009, and NI DIDS-2012 DI Driver
Systems are shown in figure 3.3.1.b. It is possible to upgrade an NI DIDS-2006 or NI DIDS-2009 DI Driver System
to a NI DIDS-20012 DI Driver System by adding a NI 9411 and NI 9751 (DI Driver) modules. System I/O may be
expanded with optional NI 9215 and NI 9758 (PFI Driver) modules (purchased separately). For more information
on the hardware included see,
. The DI Driver System software can only communicate with the
modules when they are in their assigned slots shown in figure 3.3.1.b.
The NI 9411 modules can communicate with the any of the DI Driver modules in their appropriate slots. For example,
the NI 9411 module in Slot 1: NI 9411_1 has the ability to communicate digital input signals to any of the DI Drivers
in Slots 2, 3, 5 or 6. Please note the nomenclature of the DI Drivers and their corresponding slots, as this the
identification used in the application interface.