©
National Instruments Corporation
7
NI Switches Getting Started Guide
4. Install the PXI Switch Modules
To install a PXI module, complete the following steps:
1.
Power off and unplug the PXI chassis. Follow proper ESD precautions
to ensure you are grounded before installing the hardware.
2.
Remove the filler panel of an unused PXI slot.
3.
Touch any metal part of the chassis to discharge static electricity.
4.
Insert the device into the PXI slot. Use the injector/ejector handle to
fully insert the device.
5.
Screw the device front panel to the chassis front panel mounting rail.
Figure 1.
Installing a PXI Switch Module
1
PXI or PXI/SCXI Combination Chassis
2
PXI Switch Module
3
Screws
4
Injector/Ejector Handle
8
7
6
5
4
3
2
1
ON
STANDBY
1
2
4
3
