![background image](http://html1.mh-extra.com/html/national-instruments/ni-9795-wsn-c-series/ni-9795-wsn-c-series_getting-started-manual_3402836014.webp)
©
National Instruments Corp.
13
NI 9795 Getting Started Guide
c.
Expand the
Real-Time CompactRIO
folder and select the
NI CompactRIO device type and click
OK
.
d. Right-click the NI CompactRIO device in the project and
select
New»Targets and Devices
. Click
Discover an
existing target(s) or device(s)
.
e.
Expand the NI CompactRIO chassis and select the
NI CompactRIO chassis with the NI 9795 installed that
you want to use. Click
OK
and then select
Scan Interface
as the Programming Mode of the NI CompactRIO chassis
and click
Continue
.
Note
The NI 9795 WSN C Series gateway can only be
used in a NI CompactRIO chassis that supports the RIO
Scan Interface (RSI). For more information, go to
ni.com/info
and enter
rdsoftwareversion
. To use
RSI and FPGA at the same time with a NI 9795 in the
CompactRIO chassis, go to
ni.com/kb
and enter
4XRBMIUV
.
2. Right-click on the NI CompactRIO device in the project and
select
New»Targets and Devices
.
3. Expand
WSN Node
and select the nodes for use in the project
and click
OK
.
Содержание NI 9795 WSN C Series
Страница 1: ...NI 9795...