Chapter 4
Accessory and Cable Connections
NI 951x User Manual
4-2
ni.com
5.
Connect the limits, feedback, and other I/O signals to the 37-pin
terminal block or custom cable.
6.
Connect the drive power supply to the P7000 drive.
7.
Update the axis configuration settings in software for proper operation
with the P7000 drives. Refer to
NI 951x to P7000 Drive Configuration
Settings
in the
NI SoftMotion Module
book of the
LabVIEW Help
for
axis setting information.
Figure 4-1 shows a simplified connection diagram.