![background image](http://html1.mh-extra.com/html/national-instruments/ni-9426/ni-9426_getting-started_3533166005.webp)
impédances de boucle, des surtensions temporaires et des surtensions
transitoires dans le système doit être effectuée avant de procéder à des
mesures.
Measurement Category I is for measurements performed on circuits not directly
connected to the electrical distribution system referred to as MAINS voltage. MAINS
is a hazardous live electrical supply system that powers equipment. This category is
for measurements of voltages from specially protected secondary circuits. Such
voltage measurements include signal levels, special equipment, limited-energy
parts of equipment, circuits powered by regulated low-voltage sources, and
electronics.
Note
Measurement Categories CAT I and CAT O are equivalent. These test
and measurement circuits are for other circuits not intended for direct
connection to the MAINS building installations of Measurement Categories
CAT II, CAT III, or CAT IV.
Safety Guidelines for Hazardous Voltages
Caution
Ensure that hazardous voltage wiring is performed only by
qualified personnel adhering to local electrical standards.
Caution
Do not mix hazardous voltage circuits and human-accessible
circuits on the same module.
Caution
Ensure that devices and circuits connected to the module are
properly insulated from human contact.
Caution
When module terminals are hazardous voltage LIVE (>42.4 V
pk
/60
V DC), you must ensure that devices and circuits connected to the module
are properly insulated from human contact.
© National Instruments
5
NI-9426 Getting Started
Содержание NI 9426
Страница 1: ...NI 9426 Getting Started 2022 07 06...