background image

©

 National Instruments Corporation

3

NI 6509 User Guide and Specifications

Programming Devices in Software

National Instruments measurement devices are packaged with NI-DAQ 
driver software, an extensive library of functions and VIs you can call from 
your application software, such as LabVIEW or LabWindows

/CVI

, to 

program all the features of your NI measurement devices. Driver software 
has an application programming interface (API), which is a library of VIs, 
functions, classes, attributes, and properties for creating applications for 
your device.

NI-DAQ 8.

x

 includes two NI-DAQ drivers, Traditional NI-DAQ (Legacy) 

and NI-DAQmx. Each driver has its own API, hardware configuration, and 
software configuration. Refer to the 

DAQ Getting Started Guide

 for more 

information about the two drivers.

Traditional NI-DAQ (Legacy) and NI-DAQmx each include a collection of 
programming examples to help you get started developing an application. 
You can modify example code and save it in an application. You can use 
examples to develop a new application or add example code to an existing 
application.

To locate LabVIEW and LabWindows/CVI examples, open the National 
Instruments Example Finder:

In LabVIEW, select 

Help»Find Examples

.

In LabWindows/CVI, select 

Help»NI Example Finder

.

Measurement Studio, Visual Basic, and ANSI C examples are in the 
following directories:

NI-DAQmx examples for Measurement Studio-supported languages 
are in the following directories:

MeasurementStudio\VCNET\Examples\NIDaq

MeasurementStudio\DotNET\Examples\NIDaq

Traditional NI-DAQ (Legacy) examples for Visual Basic are in the 
following two directories:

NI-DAQ\Examples\Visual Basic with Measurement 

Studio

 directory contains a link to the ActiveX control examples 

for use with Measurement Studio

NI-DAQ\Examples\VBasic

 directory contains the examples not 

associated with Measurement Studio

NI-DAQmx examples for ANSI C are in the 

NI-DAQ\Examples\

DAQmx ANSI C Dev

 directory

Traditional NI-DAQ (Legacy) examples for ANSI C are in the 

NI-DAQ\Examples\VisualC

 directory

For additional examples, refer to 

zone.ni.com

.

Содержание NI 6509
























Отзывы: