National Instruments NI-5752B, Руководство по началу работы

Страница: 7 / 17

3. Unpack any other items and documentation from the kit.
Store the devices in the antistatic package when they are not in use.
Preparing the Environment
Ensure that the environment you are using the NI 5752/5752B in meets the following
specifications.
Operating temperature (IEC 60068-2-1,
IEC 60068-2-2)
0 °C to 55 °C
Operating humidity (IEC 60068-2-56) 10% to 90% RH, noncondensing
Pollution Degree 2
Maximum altitude 2,000 m at 25 °C ambient temperature
Indoor use only.
Note
Refer to the
NI 5752/5752B Specifications
at
ni.com/manuals
for complete
specifications.
Caution
Clean the hardware with a soft, nonmetallic brush. Make sure that the
hardware is completely dry and free from contaminants before returning it to
service.
Installing the NI 5752/5752B
Refer to the getting started guide for your FlexRIO FPGA module or Controller for FlexRIO
for instructions about how to install your FlexRIO system, including the NI 5752/5752B.
Cables
NI recommends using the following cables with the NI 5752/5752B.
Signal Cable Description Part Number
Analog SHC68-C68-D3 188143B-01
Digital SHC68-C68-D4 196275A-01
These cables connect directly to the analog and digital connector on the NI 5752/5752B.
6 | ni.com | NI 5752/5752B Getting Started Guide