National Instruments NI-5742, Руководство по началу работы

Страница: 14 / 19

AUX I/O Connector
Table 2. NI 5742 AUX I/O Connector Pin Assignments
AUX I/O Connector Pin Signal Signal Description
18
16
14
12
10
8
6
4
2
19
17
1
3
5
7
9
11
13
15
1 DIO Port 0 (0) Bidirectional single-ended (SE) digital I/O (DIO)
data channel.
2 GND Ground reference for signals.
3 DIO Port 0 (1) Bidirectional SE DIO data channel.
4 DIO Port 0 (2) Bidirectional SE DIO data channel.
5 GND Ground reference for signals.
6 DIO Port 0 (3) Bidirectional SE DIO data channel.
7 DIO Port 1 (0) Bidirectional SE DIO data channel.
8 GND Ground reference for signals.
9 DIO Port 1 (1) Bidirectional SE DIO data channel.
10 DIO Port 1 (2) Bidirectional SE DIO data channel.
11 GND Ground reference for signals.
12 DIO Port 1 (3) Bidirectional SE DIO data channel.
13 PFI 0 Bidirectional SE DIO data channel.
14 NC No connect.
15 PFI 1 Bidirectional SE DIO data channel.
16 PFI 2 Bidirectional SE DIO data channel.
17 GND Ground reference for signals.
18 +5 V +5 V power (10 mA maximum).
19 PFI 3 Bidirectional SE DIO data channel.
Caution
The AUX I/O connector accepts a standard, third-party HDMI cable, but
the AUX I/O port is not an HDMI interface. Do not connect the AUX I/O port on the
NI 5742 to the HDMI port of another device. NI is not liable for any damage
resulting from such signal connections.
Block Diagrams
The following figure shows the NI 5742 block diagram and signal flow.
NI 5742 Getting Started Guide | © National Instruments | 13