![background image](http://html1.mh-extra.com/html/national-instruments/ni-5731-series/ni-5731-series_user-manual-and-specifications_3535275039.webp)
©
National Instruments Corporation
39
NI 5731/5732/5733/5734R User Guide and Specifications
Environmental
Operating environment
1
.........................................0
C to 55
C,
tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2.
Relative humidity range .........................................10% to 90%, noncondensing,
tested in accordance with IEC-60068-2-56.
Pollution Degree ....................................................2
Altitude ..................................................................2,000 m
Indoor use only.
Storage environment
Ambient temperature range ...........................–20
C to 70
C,
tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2.
Relative humidity range .................................5% to 95%, noncondensing,
tested in accordance with IEC-60068-2-56.
Note
Clean the device with a soft, non-metallic brush. Make sure that the device is completely dry
and free from contaminants before returning it to service.
Shock and Vibration
Operational shock ..................................................30 g peak, half-sine, 11 ms pulse,
tested in accordance with IEC-60068-2-27.
Test profile developed in accordance with
MIL-PRF-28800F.
Random vibration
Operating .......................................................5 Hz to 500 Hz, 0.3 g
rms
Nonoperating .................................................5 Hz to 500 Hz, 2.4 g
rms
,
tested in accordance with IEC-60068-2-64.
Nonoperating test profile exceeds the requirements
of MIL-PRF-28800F, Class 3.
Safety
This product meets the requirements of the following standards of safety for electrical equipment for
measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or the
section.
1
For PXI/PXI Express chassis configurations that group NI FlexRIO adapter modules in three or more contiguous slots,
National Instruments recommends limiting the ambient operating temperature to less than 50
C.